Home North AmericaNorth America 2012 Has wireless video finally come of age?

Has wireless video finally come of age?

by david.nunes
Metin Taskin Issue:North America 2012
Article no.:12
Topic:Has wireless video finally come of age?
Author:Metin Taskin
Title:CTO
Organisation:AirTies
PDF size:285KB

About author

Metin Ismail Taskin is the CTO of AirTies.

After working as a research engineer at TUBITAK (Scientific and Technical Research Council of Turkey) National Metrology Institute, Mr Taskin continued his career in the United States. First, he worked at Hittite Microwave Corporation in Boston MA, designing radar and microwave communications systems. Later, he joined Cisco Systems in San Jose CA, and worked for Wireless Access Business Unit developing fixed wireless access devices. At this department, he was responsible for system design of outdoor wireless base station and subscriber devices providing wireless Internet access. Mr Taskin then moved to the Wireless Networking Business Unit of Cisco and became a system architect. He led a team of 20 to 30 engineers who developed BR1410, an IEEE 802.11a compliant Wireless Outdoor Bridge. His success in the design and development of this product won him the “Cisco Innovator” award. Mr Taskin left Cisco Systems and moved back to Turkey in order to join the founding team of AirTies. He is currently working as the company’s Chief Technology Officer.

Metin Taskin received his bachelor’s degree in Electrical and Electronics Engineering; and master’s degree in Biomedical Engineering, from Bogaziçi University (Bosphorus University) in Istanbul, Turkey.

Article abstract

Streaming video over WiFi has not been delivered satisfactorily until recently. Demand for multiple home HD TVs and video recorders is growing, therefore high quality streaming over a home WiFi network becomes essential. This can now be accomplished with the latest IEEE standard – 802.11n. Particularly important is the integration of MIMO technology that permits multiple inputs and outputs simultaneously, thus increasing coverage and wireless data rate. Chipsets with 4×4 MIMO transceivers are coming to the market, making implementation feasible. In addition, the AirTel ‘Mesh Point’ system can maximize the home network capacity by boosting signals between HD TVs, instead of relying only on the central signal point.

Full Article

Service providers struggled for years to make high-quality, reliable wireless video streaming a reality. They are often confronted by pervasive problems that seemed impossible to resolve. Lately technical developments have made it possible to overcome problems commonly associated with wireless video distribution, particularly coverage area and quality of service: packet loss, interference, jitter and latency. Recently, it seems that wireless video streaming has finally come of age.

Almost every wireless solution that came out in the past, worked in environments where the transmitter and receivers were in close proximity and there was no wireless interference. When these conditions were not met, the video delivery was very poor, resulting in picture freezing and pixilation.

The use of reinforced concrete and brick, particularly in older buildings, is posing the biggest obstacle to wireless streaming. The walls and floors severely weaken wireless signals and also create a phenomenon called ‘multipath’ while signals are passing through or reflected by them. Both weak signals and strong multipath result in packet loss and lower data rate. The development of new technology called MIMO (Multiple Input Multiple Output), which incorporates multiple transmitters and receivers in the same device, successfully overcomes this hurdle by increasing tolerance against signal attenuation and multipath. Moreover, using five GHz bands with many available frequency channels to increase network capacity and avoid interference has revolutionised wireless streaming. Today, dynamic channel management technology scans the available streaming channels for interference and noise. It then automatically selects the optimal channel with least interference to deliver multi-HD (High Definition) video streams. There are also new standards that ensure Quality of Service to high-priority video packets against low-priority data packets.

Technological developments aside, what are the practical developments of this technology and how can the average consumer benefit from these developments and enjoy reliable, wireless video streaming?

A retrospective: Then and now

For many years, the ability to stream IP video inside a home was a goal pursued by a variety of players. Several vendors developed a number of proprietary solutions. Despite some incremental industry technological advancements, no universal solution to the challenge of complete wireless streaming was realised until recently.

The IEEE, one of the world’s largest professional organisations specialising in the advancement of technology, has developed many wireless LAN (local area network) standards for solutions and products to adhere to over recent years, each with varying levels of success and failures.

When we started with 11Mbps 802.11b devices, it quickly became apparent that video delivery over Wi-Fi networks was hindered by a low data rate, high packet loss and poor quality of service. We were then reassured with a new, faster standard (54 Mbps) and 802.11a was introduced. However, even the 802.11a was limited: it only operated in 5GHz frequency band and 802.11b devices were interoperable with the 802.11a standard. The next iteration, the 802.11g standard, was very successful for internet access and data delivery but it was not good enough to deliver video. It suffered from packet loss, interference and insufficient wireless range issues.

Today the common wireless LAN standard is 802.11n. Thus far, 802.11n has proven to be the most successful because it provides a framework for chipset developers when building support for video steaming. The 802.11n standard is the first using MIMO. It allows up to four transmitters and four receivers (1×1 to 4×4) to run simultaneously to increase the wireless data rate up to 600 Mbps. MIMO technology not only increases the data rate to 600 Mbps, it also increases wireless coverage range by using multiple antennas to transmit and receive.

Due to the higher costs of having multi-transmitter and receiver circuits when the 802.11n standard came into force, Wi-Fi chipset companies did not implement more than two transmitters and two receivers. One company, Quantenna, focused efforts on developing a unique chipset with 4×4 MIMO. With this technology wireless devices could reach a data rate of 600 Mbps while increasing the coverage range. Practically speaking, Quantenna chips make it possible to stream multiple HD video channels simultaneously and cover an unprecedentedly wide wireless range.

Bridging the gap

In the absence of a truly effective Wi-Fi solution for wireless video streaming an alternative, known as Power Line Communication Technology, was employed. Power line communication systems carry data on the same wires as those for electric power. Consumers can buy power line adapter sets at most electronics retailers and use them to establish a wired connection using existing electrical wiring in the home.

Today, power line adaptors only deliver one or two HD streams. Unfortunately, power line suffers from low quality wiring in homes and interference generated by other electronic devices using the same electric wires. Because of this, power line adaptors cannot deliver their advertised data rates in a real home environment. The realistic limit delivers 1-2 HD video streams at an acceptable quality.

The demand for video delivery capacity in a home network continues to increase as consumers expect more. The maths is simple: a high-quality HD video starts at ten Mbps per channel and goes up to 20 Mbps, depending on the delivery network. When a home has three HDTVs (High Definition Televisions) with PVRs (Personal Video Recorders) capable of recording multiple streams simultaneously, the number of HD video streams that need to travel inside the home easily increases to nine (three for each PVR: one watch, two record). Thus, whatever the delivery solution may be, it needs to have a network capacity between 90-180 Mbps. No power line adaptors can deliver that performance.

Looking ahead: the future of Wi-Fi

New standards and recent innovations in wireless networking have made the concept of the networked home a reality and seamless video streaming via a Wi-Fi network feasible. From my perspective, there are three essential components to make the experience of a wirelessly networked home truly compelling to the consumer: 1) a viable network capable of streaming multi HD video throughout the home, 2) the ease of installation and use, and 3) the integration of applications that will ignite consumer interest.

The new 4×4 MIMO chipset is capable of delivering the wireless performance we have all been waiting for at an affordable price. Industry leaders in Europe and America are currently testing this technology. Many regard 4×4 as the right solution, and many more are set to follow suit. Although 4×4 technology solves the problem of wireless range and signal quality, it is not panacea for the problems that inhibit reliable Wi-Fi streaming across a large area. There are still notable exceptions where 4×4 technology cannot cover large houses.

This is where innovative technology, such as AirTies’ automatic mesh networking technology, complements industry standards to make wireless streaming reliable everywhere. Wireless mesh technology makes every TV with a connected wireless adapter a ’mesh‘ point. Rather than simply receive signals from a central router, mesh points are smart: they route wireless packets to other devices to maximise the total network capacity and extend the wireless coverage area. Previously most wireless devices acted as clients and only received signals from a central router. In a large house, the client device may have a very weak reception from the central router resulting in a connection with very low data rate and high packet loss. A series of mesh points eliminates weak links and maximises the total network throughput while enabling endless wireless expansion across large area. For example, if there is a home with a wireless router and three TVs with wireless adaptors, the wireless coverage area effectively becomes four times wider than a single Access Point with three wireless clients as supported by any other product.

Mesh technology provides ultra-wide coverage and reliable wireless networking for entire home entertainment. It builds HD video streaming solutions with unmatched range and performance, whilst avoiding problems typically associated with wireless video distribution.

Conclusion

The home networking revolution has entered a new era in which users can easily and efficiently share video and data across many devices. The success of the smart phones, tablets and internet video delivery services like BBC iPlayer has stimulated user demand for video based content and made the need for wireless video streaming ubiquitous. As many broadcast operators start to deploy whole home PVR solutions where only one central PVR records live content then streams it to other TVs in the home, the delivery of many high bitrate HD videos inside the home is a great need. The most convenient way to create a home network with the capacity to deliver video and data is with wireless video streaming technology. Yet for wireless video streaming to succeed, it will need to make sound commercial sense to operators. This means that wireless networking solutions need to be affordable whilst the cost of deployment and ownership are minimal. With affordable 4×4 802.11n wireless chips, the use of five GHz, new QoS and interference avoidance algorithms, and mesh networking technology, delivering multi-HD video streams becomes affordable and easy to use.

Related Articles

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More